Cream of the Crop 1/Cream of the Crop 1.iso/EDITOR/AMAC44.ARJ/MACR33.QM

Text File | 1992-06-22 | 38KB | 813 lines

*                             MACR33.QM, v3.3b
*                Macros To Make, Convert and Read Macros
*                        Written by Tom Hogshead
*                 With Macro Contributions By Tim Farley
*                                 6/22/92
*
*   @f6     Condense Qmac Macro to Fit On One Line of Qconfig.dat ( )     |new
*   @2      Reads "Standard" Macros
*   @8      Reads Current Txtfile Macros
*   @3      Append Designated Txtfile With Current Macros, Reads Macfile
*   @4      Appends Current Txtfile To Standard Macros, Reads Macfile
*   @5      Gets Error File In Window To Find Another Error
*   @6      Makes Dummy Txtfile From Current Macros
*   @7      Makes & Reads Dummy Macfile From Txtfile, With Error Window
*   @t      Makes & Reads Dummy Macfile From Txtfile, SMALL
*   @9      Makes Macfile of Current Txtfile Macros, No Macfile Read
*   @0      Makes & Reads Macfile of Current Txtfile, With Error Window
*   @q      Makes & Reads Macfile of Current Txtfile Txtfile, SMALL
*   @f1     Makes Single Column Macro
*   @f2     Puts Command Key Beside A Single Command In A Macro
*   @f3     Puts Command Key Beside ALL Commands In A Macro
*   @f4     Gets A Single Command And It's Key On Screen
*   @f5     Test TRUE/FALSE Results, Tim Farley, Author
*   @3      {e:\up\mis006}  Test True/False for WhiteSpace/Non-WhiteSpace
*   @h      Jump to Index Item on Cursor Line
*
*           Index  Use      - How to jump to macro or item from Index using @h
*           Description     - MacroMaker Macros
*           Requirements    - and use
*           Startup         - See MACR.DOC for startup instructions
*           Macros
*           Other  Macros   - not included
*           Version  History
*
*-- eoi


*
* (Description)
*---------------
* MACRxx.ZIP contains QEdit macros to easily make and convert macros to
* and from text/binary (txtfile/macfile) using QMAC macro translator.

*
* (Requirements) and Use.  See MACR.DOC for (startup) instructions
*------------------------------------------------------------------
*         1. Txtfile name extension MUST be [file].QM, Macfile [file].MAC.
*         2. Change ram disk c:\ (also in batch files) for your setup.
*            Ram disk is optional but faster than a hard drive. Use any
*            active drive letter to replace c:\.
*         3. Batch files must be in path or current directory.
*         4. Modify "g:\qe\MACROS.xxx" in macros to your "standard" macro.
*            Be careful to use or not use extension as shown, with spaces.
*         5. Be sure to change "g:\qe\qconfig.dat" in the macros @f2 -
*            @f4 below to the location of your qconfig.dat in your
*            setup, and convert with QMAC.
*         6. In order for macros @f2 - @f4 to find a command in
*            Qconfig.dat, there must be at least eight blank spaces
*            betweeen the end of the command key and the beginning of
*            the command.  If your Qconfig.dat has fewer spaces, the
*            macros must be modified in the first 'FIND' line.
*         7. Insert must be ON.
*         8. These macros require "QEdit and QMAC v2.1, February, 1990"
*            or later.  @0 and @f3 require v2.15.
*         9. Insert must be On.

* To BEGIN, just type "START MACR" <Enter>.  All pertinent files will
* be loaded in the "Ring" for viewing, and MACR33.MAC is read.

*
* (Index) Use
*-------------
* To locate a macro or item in this file, press @h, place the cursor
* line on the desired item in the Index above, and press <enter>.
* See BOOKxx.QM for more details.

*                            M A C R O S
* ----------------------------------------------------------------------
* @(2)  - Reads "Standard" (Macros)
* ----------------------------------------------------------------------
* Remember you MUST modify "g:\qe\macros.mac" with your "standard" macfile.

@2 MacroBegin MacroRead "g:\qe\macros.mac" Return
*
* 38 bytes Fri  09-14-1990  14:05:43
* 38 bytes Mon  10-14-1991  10:57:25 (TH @2)

*
* ----------------------------------------------------------------------
* @(3) - Append Designated Txtfile With Current Macros, Reads Macfile
* ----------------------------------------------------------------------

@3 macrobegin onewindow dropanchor
   editfile "NUL" return quit gotoblockbeg editfile return
   "Merge macro ?" cursorright          * query for macro name, no extension
   markcharacter pause copy
   macrowrite "dum4.mac" return return
   quit
   DOS "qmacM " paste return return     * append designated to current macros
   editfile "c:!" return quit horizontalwindow editfile return
   insertdate  inserttime
   find "(" return delline return       * find first error
 jfalse NOERROR  wordright markword copy
   savefile prevwindow
   gotoline paste return                * move to line with first error
   makectrofscreen pause
 jump CONTINUE
 NOERROR:
   prevwindow
 CONTINUE:
   onewindow
   editfile "dum4.qm" return            * load txtfile with appended macro
   splitline newfile "N" return         * re-load in case previous copy loaded
   endfile addline "*...Tom Hogshead "  *  (change to your name)
  insertdate inserttime "Appended "
  paste                                 * paste file name we are appending
  endline ".qm to current macros"
  unmarkblock savefile                  * save new txtfile with appended macro
  macroread "dum4.mac" return           * read current + appended macros
*
* 262 bytes Wed  05-01-1991  12:26:00
* 263 bytes Fri  10-18-1991  13:57:46 (TH @3)

*   ┌───────────────────────── QMACM.BAT ──────────────────────────────┐
*   │ rem qmacM.bat                   Sun  09-30-1990                  │
*   │ rem * Converts current macros to dum4.qm text...                 │
*   │         QMAC      dum4.mac dum4.qm /T /A-  >c:!                  │
*   │ rem * Appends macros to be merged to dum4.qm....                 │
*   │         QMAC        %1.mac dum4.qm /T /A+ >>c:!                  │
*   │ rem * Converts appended macro to binary.........                 │
*   │         QMAC      dum4.mac dum4.qm /B /A- >>c:!                  │
*   └──────────────────────────────────────────────────────────────────┘

*
* ----------------------------------------------------------------------
* @(4) - Appends Current Txtfile To Standard Macros, Reads Macfile
* ----------------------------------------------------------------------
*  Remember you MUST modify "g:\qe\macros" (no extension) in this
*  macro to your "standard" macfile.

* Be careful that the macro size of the txtfile you are appending plus
* the size of your standard macros do not exceed 2k, the macro buffer
* limitation. If this occurs, you will get an error message, and the
* macros will not be appended.

@4 macrobegin
   unmarkblock savefile onewindow
   DOS "qmacTA2 " currentfilename backspace backspace backspace " "
  "g:\qe\macros"                    *<<<<<CHANGE Standard macros name, no ext.
   return
   begline insertline dropanchor currentfilename
   storescrbuff "1" return cut
   editfile "c:!" return quit
   editfile paste return                * return to current txtfile
   horizontalwindow
   editfile "c:!" return                * get error file in window 2
   find "(" return delline return       * find first error
 jfalse NOERROR  wordright markword copy
   savefile prevwindow
   gotoline paste return                * move to line with first error
   makectrofscreen pause
 jump CONTINUE
 NOERROR: prevwindow
 CONTINUE: onewindow                    *                                 |
   editfile "c:$" return killfile quit
   editfile "dum3.qm" return quit editfile return         * load dum3.qm
   endfile addline begline
  "*" cursorright "Tom Hogshead"
   cursorright cursorright insertdate inserttime
  "Appnd:" cursorright
   getscrbuff "1" return unmarkblock    * Insert file at eof
   savefile
   macroread currentfilename backspace backspace "MAC" return  * read dum3.mac
*
* 229 bytes Wed  05-01-1991  12:45:43
* 229 bytes Sun  10-13-1991  13:48:43 (TH @4, changed e:\ to f:\)
* 202 bytes Fri  10-18-1991  14:45:55 (TH @4, shortened)
* 202 bytes Fri  10-18-1991  14:48:56 (TH @4)

*   ┌───────────────────────── QMACTA2.BAT ────────────────────────────────┐
*   │ @echo off                                                            │
*   │ echo qmacTA2.BAT                Sun  09-30-1990                      │
*   │     echo Appending %1.MAC  TO  %2.QM                                 │
*   │     echo .                                                           │
*   │     if exist c:dum*.qm erase c:dum*.qm                               │
*   │     rem c:\ is ram disk, change to any active directory              │
*   │ :1                                                                   │
*   │     echo FIRST, Converting %1.QM  TO  %1.MAC                         │
*   │     if not exist %1.QM goto NOTEXIST                                 │
*   │     QMAC   %1.MAC      %1.QM   /B /A-       %3  >c:!                 │
*   │     echo Copying  %2.QM  TO  c:dum1.QM  & c:dum2.QM                  │
*   │     copy %2.qm c:dum1.qm                                             │
*   │     copy %2.qm c:dum2.qm                                             │
*   │ :2                                                                   │
*   │     echo SECOND, Appending %1.MAC  TO  c:dum2.QM                     │
*   │     QMAC   %1.MAC   c:dum2.QM /T /A+ /W70   %3 >>c:!                 │
*   │     echo Copying  c:dum2.QM  TO  dum3.QM (Appended txtfile)          │
*   │     copy c:dum2.qm  dum3.qm                                          │
*   │ :3                                                                   │
*   │     echo THIRD, Converting dum3.QM  TO  dum3.MAC (Appended macfile)  │
*   │     QMAC   dum3.MAC    dum3.QM /B /A-       %3 >>c:!                 │
*   │           dir %1.qm       >c:$                                       │
*   │           dir %2.qm      >>c:$                                       │
*   │           dir c:dum?.qm  >>c:$                                       │
*   │           dir dum?.qm    >>c:$                                       │
*   │           dir %1.mac     >>c:$                                       │
*   │           dir %2.mac     >>c:$                                       │
*   │           dir dum?.mac   >>c:$                                       │
*   │     goto END                                                         │
*   │ :NOTEXIST                                                            │
*   │         echo %1.QM does not exist                                   │
*   │ :END                                                                 │
*   └──────────────────────────────────────────────────────────────────────┘

*
* ----------------------------------------------------------------------
* @(5) Gets Error File (C:!) In Window To Find Another Error
* ----------------------------------------------------------------------
* At the pause, cursor down to error line and press <enter>, or if no
* errors, press <enter> to return to cursor position when macro was
* invoked.

@5  macrobegin
        defaultwordset                                                     *|
        onewindow horizontalwindow
        editfile "c:!" return begfile
        pause markline find "(" return "L" return
    jfalse NOERROR  wordright markword copy
        quit prevwindow gotoline paste return
    jump CONTINUE
    NOERROR:  quit prevwindow
    CONTINUE: onewindow
*
* 17 bytes Fri  09-14-1990  14:05:55
* 41 bytes Fri  10-18-1991  13:58:27 (TH @5)
* 42 bytes Mon  01-27-1992  13:58:11 (TH @5, added defaultwordset)
* 42 bytes Sun  05-17-1992  11:26:24 (TH @5, for all Qconfig's)

*
* ----------------------------------------------------------------------
* @(6) - Makes Dummy Txtfile From Current Macros
* ----------------------------------------------------------------------

@6 macrobegin
       insertline begline macrowrite "c:$.mac" return "Y" delline
       DOS "qmact c:$" return return                            * make c:$.qm
       editfile backspace backspace backspace "qm" return quit  * quit c:$.qm
       editfile return killfile endfile                         * load c:$.qm
*
* 61 bytes Sat   09-15-1990  14:26:40
* 60 bytes Thu  10-17-1991  13:14:43 (TH @6, safer)

*   ┌───────────────────────── QMACT.BAT ──────────────────────────────┐
*   │ @echo off                                                        │
*   │ : qmacT.bat             December 21, 1991                        │
*   │         cls                                                      │
*   │         echo Converts %1.MAC (binary) To %1.QM (text)            │
*   │         if not exist %1.MAC goto NOTEXIST                        │
*   │         QMAC   %1.MAC      %1.QM   /T /A- /I05 /W75 %2 %3        │
*   │         goto END                                                 │
*   │ :NOTEXIST                                                        │
*   │         echo %1.MAC does not exist                              │
*   │ :END                                                             │
*   └──────────────────────────────────────────────────────────────────┘

*
* ----------------------------------------------------------------------
* @(7) - Makes & Reads Dummy Macfile From Txtfile, With Error Window
* ----------------------------------------------------------------------

@7 macrobegin
   onewindow defaultwordset                                                *|
   endline cursorright writeblock "c:$.qm" return "O" backspace begline
   begline insertline unmarkblock dropanchor currentfilename
   storescrbuff "1" return cut
   editfile return quit editfile return
   DOS "qmacbj c:$" return return               * make c:$.mac
   begline insertline dropanchor currentfilename cut
   editfile "c:!" return quit editfile paste return
   horizontalwindow
   editfile "c:!" return                        * load error file in window 2
   insertdate inserttime
   find "(" return delline return               * find first error
 jfalse NOERROR  wordright markword copy
   savefile prevwindow gotoline paste return makectrofscreen
   pause
 jump CONTINUE
 NOERROR: prevwindow
 CONTINUE: onewindow
   DOS "qmact c:$" return return                * make c:$.qm
   editfile "c:$.qm" return quit editfile return    * load c:$.qm
   endfile addline "*" cursorright insertdate inserttime
   getscrbuff "1" return unmarkblock            * Insert file name at eof
   killfile                                     * kill c:$.qm
   macroread currentfilename backspace backspace "MAC" return
*
* 185 bytes Wed  05-01-1991  13:19:11
* 173 bytes Thu  05-16-1991  11:52:26 (TH removed unnecessary c:$.qm)
* 177 bytes Fri  10-18-1991  13:58:42 (TH @7)
* 178 bytes Mon  01-27-1992  13:56:02 (TH @7, added defaultwordset)

*   ┌───────────────────────── QMACBJ.BAT ─────────────────────────────┐
*   │ @echo off                                                        │
*   │ rem qmacBJ.bat                  Sun  09-30-1990                  │
*   │         cls                                                      │
*   │         echo Converts %1.QM (text) To %1.MAC (binary)            │
*   │         echo Any errors will be in file c:!                      │
*   │         if not exist %1.QM goto NOTEXIST                         │
*   │         QMAC   %1.MAC      %1.QM   /B /A-       %2 %3  >c:!      │
*   │         goto END                                                 │
*   │ :NOTEXIST                                                        │
*   │         echo %1.QM does not exist                               │
*   │ :END                                                             │
*   └──────────────────────────────────────────────────────────────────┘

*
* ----------------------------------------------------------------------
* @(8) - Reads Macfile of Current Txtfile
* ----------------------------------------------------------------------

@8 macrobegin macroread currentfilename backspace backspace "mac" return
*
* 15 bytes Fri  09-14-1990  14:06:11

*
* ----------------------------------------------------------------------
*  @(9) - Makes Macfile of Current Txtfile, No Macfile Read
* ----------------------------------------------------------------------

@9  macrobegin savefile
    DOS "qmacb " currentfilename backspace backspace backspace return
*
* 23 bytes Fri  09-14-1990  14:06:14

*   ┌───────────────────────── QMACB.BAT ──────────────────────────────┐
*   │ @echo off                                                        │
*   │ rem qmacB.bat                   Sun  09-30-1990                  │
*   │         cls                                                      │
*   │         echo Converts %1.QM (text) To %1.MAC (binary)            │
*   │         if not exist %1.QM goto NOTEXIST                         │
*   │         QMAC   %1.MAC      %1.QM   /B /A-       %2 %3            │
*   │         goto END                                                 │
*   │ :NOTEXIST                                                        │
*   │         echo %1.QM does not exist                               │
*   │ :END                                                             │
*   └──────────────────────────────────────────────────────────────────┘

*
* ----------------------------------------------------------------------
* @(0) - Makes & Reads Macfile of Current Txtfile, With Error Window
* ----------------------------------------------------------------------
* This macro requires QEdit v2.15, and will fit on one line of Qconfig.dat.

@0 macrobegin
        defaultwordset setscreenoff savefile onewindow unmarkblock dropanchor
        DOS "qmacbj " currentfilename
        backspace backspace backspace return return
        editfile "c:!" return quit gotoblockbeg unmarkblock
        horizontalwindow editfile return
        find "(" return delline return               * Find first error
    jfalse NOERROR  wordright markword copy
        prevwindow gotoline paste return             * Pos cursor on error
        setscreenon pause setscreenoff
    jump CONTINUE
    NOERROR: quit prevwindow
    CONTINUE:
        onewindow macroread currentfilename backspace backspace "mac" return
*
* 94 bytes Wed  05-01-1991  13:38:07
* 80 bytes Thu  10-17-1991  13:41:58 (TH @0, shortened, QEdit v2.15 reqd.)
* 81 bytes Mon  01-27-1992  13:58:57 (TH @0, added defaultwordset)

*
* ----------------------------------------------------------------------
* @(t) Copies txtfile [file].QM to dummy txtfile,
*      Makes and reads macfile, small version
* ----------------------------------------------------------------------
* This is an alternate version of @7. Errors during macro conversion are
* not saved in an error window. It is much smaller than @7.

@t      MacroBegin
        unmarkblock endline cursorright                             *|
        writeblock "c:$.qm" return "O" backspace begline            *|
        DOS "qmacB c:$" Return Return           * make temp macfile
        DOS "qmacT c:$" Return Return           * make temp txtfile
        EditFile  "c:$.qm" Return Killfile      * Kill temp file
        MacroRead "c:$.Mac" Return              * read temp macfile
*
* 95 bytes Fri  09-14-1990  14:06:07
* 98 bytes Mon  10-14-1991  15:53:22 (TH @t)

*
* ----------------------------------------------------------------------
* @(q) Makes macfile from txtfile [file].QM
*      Loads macfile [file].MAC, NO error window, SMALL
* ----------------------------------------------------------------------

@q macrobegin
   savefile
   DOS "qmacb " currentfilename backspace backspace backspace return return
   macroread currentfilename backspace backspace "mac" return
*
* 35 bytes Fri  09-14-1990  14:06:22

*
* ----------------------------------------------------------------------
* @(h) Finds first word on cursor line marked in document below
* ----------------------------------------------------------------------

* See BOOKxx.QM for use of @h.

@h      MacroBegin UnmarkBlock DefaultWordSet BegFile EndPara
        MarkLine BegFile Find "(" Return "L" Return JFalse Label0
        MakeCtrOfScreen BegFile UnmarkBlock MarkLine MarkLine
        PrevPosition BegLine Pause WordRight MarkWord Copy EndPara
        Find "(" Paste ")" Return "I" Return JFalse Label1  BegLine
        MakeTopOfScreen ScrollUp Jump Label2  Label0: Label1: BegFile
        Label2:
*
* 52 bytes Wed  07-31-1991  14:43:31 (TH @h, @4 in MACRxx.QM)

*
* ----------------------------------------------------------------------
* @(F1) Makes Single Column Macro
* ----------------------------------------------------------------------
* To  make a single column macro with Alt_f1, place the cursor line
* anywhere in a macro txtfile (after loading the macfile) and press Alt
* and f1 at the same time. If a macro is not a marked block, the full
* txtfile is made into a single column macros.

@f1 macrobegin
        endline cursorright writeblock "c:$.qm" return "O" backspace begline
        DOS "qmacB c:$"   return return                     * Make macfile
        DOS "qmacT-n c:$" return return                     * Make txtfile
        editfile "c:$.qm" return quit editfile return
        endfile addline "*" cursorright
        insertdate inserttime killfile                      * Date stamp
*
* 98 bytes Fri  09-14-1990  14:06:30
* 103 bytes Fri  10-18-1991  14:56:58 (TH @f1 in MACRxx.QM)
* 95 bytes Thu  11-14-1991  22:42:20 (TH @f1, removed currentfilename)

*   ┌───────────────────────── QMACB.BAT ──────────────────────────────┐
*   │ @echo off                                                        │
*   │ rem qmacB.bat                   Sun  09-30-1990                  │
*   │         cls                                                      │
*   │         echo Converts %1.QM (text) To %1.MAC (binary)            │
*   │         if not exist %1.QM goto NOTEXIST                         │
*   │         QMAC   %1.MAC      %1.QM   /B /A-       %2 %3            │
*   │         goto END                                                 │
*   │ :NOTEXIST                                                        │
*   │         echo %1.QM does not exist                               │
*   │ :END                                                             │
*   └──────────────────────────────────────────────────────────────────┘
*   ┌────────────────────────── QMACT-N.BAT ───────────────────────────┐
*   │ @echo off                                                        │
*   │ rem qmacT-n.bat for single column txtfile       Sun  09-30-1990  │
*   │         cls                                                      │
*   │         echo Converts %1.MAC (binary) To %1.QM (text)            │
*   │         if not exist %1.MAC goto NOTEXIST                        │
*   │         QMAC   %1.MAC      %1.QM   /T /A- /W15  %2 %3            │
*   │         goto END                                                 │
*   │ :NOTEXIST                                                        │
*   │         echo %1.QM does not exist                               │
*   │ :END                                                             │
*   └──────────────────────────────────────────────────────────────────┘

*
* ----------------------------------------------------------------------
* @(F2) Puts Key Beside Single Command
* ----------------------------------------------------------------------
* To get the key for a single command in a macro, place the cursor line
* on the command in a single column macro txtfile and press Alt_f2. The
* key corresponding to the command will be listed next to the commmand.
* Commands must be a single command column macro made with @f1.

@f2 macrobegin
        unmarkblock insertline begline
        dropanchor currentfilename storescrbuff "1" return cut
        begline wordright markword copy
        editfile "g:\qe\qconfig.dat" return     * *<<<<<CHANGE
        begfile
        FIND "         "                * insert 8 spaces before find
        paste                           * paste command for find
        return "IW" return              * find command in qconfig.dat
 jfalse NOFIND
        wordright markcolumn            * move cursor to command
        begline "* " begline markcolumn
        storescrbuff "2" return         * get key to scrbuff
        cursordown unmarkblock
        getscrbuff "1" return cut       * cut currentfilename
        editfile paste return
        markcolumn gotocolumn "33" return     * postition to get key
        getscrbuff "2" return           * get key
        makectrofscreen
        begline cursordown
 jump END                               * End after getting key
 NOFIND:                                * come here if no key for command
        getscrbuff "1" return cut       * cut currentfilename
        editfile paste return
        gotocolumn "33" return "* "
        cursordown begline
 END:
*
* 145 bytes Mon  02-18-1991  12:32:15
* 145 bytes Sun  10-13-1991  13:49:41 (TH @f2, changed e:\ to f:\)
* 144 bytes Fri  10-18-1991  15:06:12 (TH @f2, shortened)

*
* ----------------------------------------------------------------------
* @(F3) Puts Key Beside All Commands In Single Column Macfile
* ----------------------------------------------------------------------
* To get the keys for ALL commands in a macro, place the cursor
* line at the top of a macro txtfile and press Alt_f3. An example of
* this output is shown at the end of this macro. The keys corresponding
* to each command will be listed also in a single column next to the
* command.  This macro requires QEdit v2.15.

@f3 macrobegin
        setscreenoff
        unmarkblock insertline begline dropanchor currentfilename
        storescrbuff "1" return
        cut                             * delete temp line
 START:
        endline begline                 * line blank? if so end
 jfalse END
        begline wordright markword
        copy unmarkblock                * get command to scrap, unmark
        editfile "g:\qe\qconfig.dat" return     *<<<<<CHANGE
        begfile
        FIND "         "                * insert 8 spaces before find
        paste                           * paste command for find
        return "IW" return              * find command in qconfig.dat
 jfalse NOFIND
        wordright markcolumn begline    * move cursor to command
       "* " begline markcolumn
        storescrbuff "2" return         * get key to scratch
        cursordown unmarkblock          * move down line, unmark command
        quit                            * quit qconfig.dat
        getscrbuff "1" return cut       * cut currentfilename
        editfile paste return
        markcolumn
        gotocolumn "33" return          * postition to get key
        setscreenon
        getscrbuff "2" return           * get key
        unmarkblock setscreenoff
        begline cursordown              * move down to next command
        makectrofscreen
 jump START
 NOFIND:
        getscrbuff "1" return cut
        editfile paste return
        gotocolumn "33" return "* "     * position to get key
        setscreenon setscreenoff
        begline cursordown              * move down to next command
 jump START
 END:
*
* 154 bytes Mon  02-18-1991  12:32:44
* 154 bytes Sun  10-13-1991  13:50:44 (TH @f3, change e:\ to f:\)
* 160 bytes Thu  10-17-1991  13:30:02 (TH @f3, QEdit v2.15)

*
* ----------------------------------------------------------------------
* @(F4) Retrieves A Command And It'S Key From QCONFIG.DAT
* ----------------------------------------------------------------------
* This macro retrieves a command or all commands matching a selected
* find criteria from your QCONFIG.DAT file, displays the selected
* command(s) and it's key on the screen, and then removes the
* command(s) and it's key from the screen. For those of us who can
* never remember all the commands and can never find our reference
* sheet, this might help.

* To run, press Alt_f4, then enter the first letter (or more) of the
* command you want to know the key for, press 'Enter' to see the the
* command(s) and it's key, then press 'Enter' again to remove the
* command(s) and it's key from the screen.

* For example, to find the key for appendscrbuff, press:
*                     <Alt_f4>
*                      app
*                     <Enter>

* You should see the following highlighted on your screeen:

* ^b_a            appendscrbuff

* Entering "b" instead shows all commands beginning with "b":

* ^h              backspace
* ^home           begscreen
* ^pgup           begfile
* home            begline
* backspace           backspace    *(note, at least 8 spaces required)

* Press 'Enter' to remove the command(s) and it's key from the screen,
* or press 'Esc' three times if you want to keep the command(s) on the
* screen for reference.

*  Requires QEdit v2.15.

@f4     macrobegin setscreenoff setinsmode                                 *|
        unmarkblock insertline begline dropanchor currentfilename cut
        editfile
       "g:\qe\qconfig.dat" return           *<<<<<CHANGE to you d:\path\
        endline dropanchor                  * Mark to clear scratch
        storescrbuff "1" return             * Get to scratch
        unmarkblock begfile                 * Go to begin qconfig.dat
        setscreenon                                                        *|
        FIND "         "                    * Insert 8 spaces before find
        pause                               * Pause for command to find
        return "i" return                   * Find first command
        Jfalse FAIL                         * Stop macro if search fails
  jump NEXT
  START:
        setscreenoff                                                       *|
        repeatfind                                                         *|
  jfalse FINISH                             * Mark if found, quit if not
  NEXT:
        setscreenoff                                                       *|
        markline begline                    * Mark command line
       "* "
        appendscrbuff "1" return            * Append to scratch
        cursordown unmarkblock              * Move down, unmark command
  jump START
  FINISH:
        quit                                * Quit qconfig.dat
        editfile paste return
        markcolumn
        getscrbuff "1" return               * Get command and key
        delline begline
        maketopofscreen
        setscreenon                                                        *|
        pause                               * Pause, then 'Enter' to..
        setscreenoff                                                       *|
        deleteblock                         * Clean up, remove block
        Jump END
 FAIL:
        quit                                * Quit qconfig.dat
        editfile paste return               * Return to file we were
 END:                                       *  editing if search fails
*
* 128 bytes Fri  03-29-1991  16:43:58
* 128 bytes Sun  10-13-1991  13:52:07 (TH @f4, changed e:\ to f:\)
* 128 bytes Mon  01-27-1992  14:30:21 (TH @f4, changed f:\ to g:\)
* 131 bytes Mon  04-20-1992  12:26:34 (TH @f4, QEdit v2.15 required)



*
* ----------------------------------------------------------------------
* @(F5) Test TRUE/FALSE Results, Tim Farley, author
* ----------------------------------------------------------------------
* Date: 07-30-90 (17:34)              Number: 936 / 937
*   To: KARL BRENDEL                  Refer#: 929
* From: TIM FARLEY                      Read: NO
* Subj: Testing TRUE/FALSE result     Status: PUBLIC MESSAGE
* Conf: REGDOS (1)                 Read Type: GENERAL (A)
*
* KB>I'd suggest that when you need to know what a command returns,
* KB>and it appears not to return what you expect, that you write a
* KB>test macro which prints TRUE or FALSE according to the return,
* KB>and experiment with it.
*
* Surprising as it may seem (since I obviously have inside
* knowledge of the editor), I do just this myself!  It's quicker
* for one thing....
*
* Here is the macro I use:
*
* (TH changed key from ^F10 to @F5)

@F5  MacroBegin
     JTrue true
     Find ".F." Pause Escape
     Jump end
   true:
     Find ".T." Pause Escape
   end:
*
* 28 bytes Mon  07-30-1990  19:58:27 (TH added)

* Just re-wrap this to fit on one line, then put it in your
* QCONFIG.DAT.
*
* Then, when you want to test a command, RECORD a macro that starts
* with the command you wish to test, then this macro.  For
* instance, if I wanted to test BegLine <Home>, I would do this:

*
*      (1) Press MacroRecord <Ctrl M>
*      (2) Press the key to record.  (I use <Alt 1> usually).
*      (3) Press the key to test, BegLine <Home>.
*      (4) Press the above macro, <Alt F5>
*      (5) End macro recording <Ctrl M>.
*
* Now I can just move my cursor around, and hit <Alt 1>, to test
* the true/false result of BegLine at different positions.  The
* true or false comes up in a nice little box on the screen, and
* when I press Return the box sends itself away, and does not
* damage the file I am editing or anything.
*
* Note if you run the above <Alt F5> macro by itself, it always
* returns TRUE.  QEdit does not remember the True/False state of
* the last command while "idle".  Thus the necessity of recording
* the above within a macro.
*
* --Tim Farley
*   SemWare Technical Support

* (Other) Macros available: See ALLMACRO.INF.
* See RFRMxx.QM for other commenting and un-commenting macros.

*
* ----------------------------------------------------------------------
* @(f6) Condense Qmac Textfile Macro to Fit On One Line of Qconfig.dat
* ----------------------------------------------------------------------
* This macro is useful for condensing a Qmac textfile macro to 'help'
* it fit on   one line of Qconfig.dat:

        * 'Label' replaced with 'L'
        * Colon removed after jtrue, jfalse and jump lables
        * "" removed
        * " " replaced with #32 (for re-formatting)
        * #173 characters replaced with '#173'
        * #174 characters replaced with '#174'

* A line, column or character block may be marked before invoking,
* either open or closed, and all lines in block will be processed
* without pausing.

* CAUTION:    Do not invoke @f6 on Qmac textfile of this file because
*             the eob marker #173 #174 is in the compiled macro @f6 at
*             the end of this file.  Be sure to edit the output of this
*             macro in case there are some cases I have not
*             anticipated.

@f6 macrobegin
        gotoblockend jtrue OK markline
        gotoblockend jtrue OK
        pause
    OK:
        setscreenoff
        addline begline #173 #174
        markline
        gotoblockbeg begline lower
        findreplace '""'    return delline  return 'ln' return
        findreplace "label" return "L"      return "ln" return
        findreplace '" "'   return '#32'    return "ln" return
        findreplace '"«"'   return '#174'   return "ln" return
    AGAIN:
        wordright isendline jfalse 1
        wordright
    1:
        find ':' return delline return
        jfalse END
        find #173 #174 return delline return
        jfalse END
        prevposition
        wordleft
        wordleft
        isendline jfalse 2
        wordleft
    2:
        markword
        cursorright
        find 'j' return 'LB' return
        jtrue DELCOLON
            find 'L' return 'ILB' return
            jfalse 2a
            wordright
*           wordright
            2a:
        wordright
        wordright                                                        *:21
        jump AGAIN
    DELCOLON:
        find ':' return delline return
        delch
        jump AGAIN
    END:
        find #173 #174 return 'G' return
        delline
        makebotofscreen unmarkblock
*
* 190 bytes Mon  06-22-1992  16:27:05 (TH @f6)

* Sample output of @f6
* --------------------
* @1  macrobegin cursorright gotoblockbeg jtrue l0 markline
*   gotoblockbeg jtrue l1 pause jump l2 l0: gotoblockend
*   unmarkblock markline prevposition l2: markline gotoblockbeg
*   l1: begline cursorright find "*" return "lb" return jfalse l3
*   shiftleft shiftleft jump l4 l3: shiftright shiftright begline
*   gotoblockend markcolumn prevposition begline markcolumn fillblock #32
*   return findreplace #32 return "*" return "ln" return l4:


*
* (Version) History
* ------------------
* 3.2  -  Modified @3/4/5/6/7/0/t/f1/f2/f3/f4.                        10/14/91
* 3.3  -  Modified @0/5/7 and @f1.                                     1/27/92
* 3.3a -  Modified @5 for all Qconfig's.                               5/13/92
*         Modified @f4 for QEdit v2.15.                                5/17/92
*      -  In Amac43.zip.                                               5/27/92
* 3.3b -  Added ( ) to Index line 1 for bok001.qm macros.              5/30/92
*      -  Added @f6.                                                   6/21/92
*
*
*
*--eof